Skip to main content

Great Win Fire & Safety L.L.C.

Kitchen Hood Systems

Great Win Fire & Safety LLC provides kitchen hood fire suppression solutions for commercial kitchens, helping protect cooking equipment, staff, and property from fire risks.

Kitchen Fire Protection

Kitchen Hood Fire Suppression Systems

Great Win Fire & Safety LLC provides design, supply, installation, testing and maintenance of kitchen hood fire suppression systems in Dubai and Abu Dhabi. We support restaurants, hotels, cafés, cloud kitchens, staff canteens and catering facilities, from the initial kitchen fit-out through equipment changes and cylinder refilling.

A commercial kitchen suppression system protects both the cooking equipment and the grease extraction system above it. The starting point for design is the actual cooking line. A deep-fat fryer, griddle and charbroiler beneath the same hood can each need different nozzle coverage.

We review the appliance schedule alongside the hood and duct drawings, then check the installed layout before handover.

Kitchen hood fire suppression system
System Operation

How a Wet Chemical System Works

When the heat detection system operates, the releasing mechanism discharges wet chemical agent through fixed nozzles onto the protected cooking appliances and into the designated hood plenum and exhaust duct openings. A manual pull station provides a second means of activation. The system also initiates the specified gas or electrical shutdowns to remove the heat source from the protected appliances.

01

Cooking appliances

02

Hood plenum and exhaust ducts

03

Detection and manual release

04

Fuel, power and alarm interfaces

System Planning

Design, Installation and Commissioning

What we review

01

Cooking Appliances

Appliance type, dimensions and final position beneath the hood. We select nozzle coverage for fryers, griddles, ranges, charbroilers and other equipment within the selected system’s approved design limits.

02

Hood and Ducts

Hood dimensions, filter arrangement and the number and location of duct openings. We identify the plenum and duct protection required for each hood.

03

Detection and Manual Release

Detector locations, the releasing mechanism and access to the manual pull station. We check that the completed fit-out leaves the station visible and accessible.

04

Fuel, Power and Alarm Interfaces

Which gas valves or electrical circuits serve the protected appliances, how ventilation should respond and where an activation signal should appear on the building fire alarm panel, as specified in the approved design.

Our Work Process

Design, Installation and Commissioning

01

Site survey and design

We review the kitchen layout, appliance schedule, hood dimensions, duct connections and available space for the agent cylinder and controls. Depending on the selected system, the design may use dedicated nozzles for individual appliances or overlapping coverage for a defined cooking zone. We identify the permitted appliance arrangement on the drawings so the operator has a reference for future changes.

02

Installation and coordination

We coordinate the cylinder, discharge pipework, nozzles, detectors and manual pull station with the kitchen equipment and hood installers. Once the appliances are in their final positions, we check nozzle alignment, access for servicing and any obstructions introduced during fit-out.

03

Functional testing and handover

We verify automatic and manual activation functions through controlled testing and coordinate with the gas, electrical, ventilation and fire alarm contractors to confirm the specified response at each connected system. Handover can include as-built drawings, the protected appliance layout, test records and an operator briefing on the manual pull station and how to report a fault or discharge.

Ongoing Protection

Maintenance and Kitchen Modifications

Moving a fryer to the other end of the cooking line can place it outside its intended coverage even when the hood and cylinder remain unchanged. During maintenance, we compare the kitchen in use with the protected layout. We also inspect nozzle alignment and protective caps, detection components, the release mechanism, cylinder condition and access to the manual pull station. We record defects by hood or appliance so the operator knows what needs attention.

For refurbishments, we assess the proposed changes before appliances are moved or replaced. This allows nozzle alterations, additional protection and changes to shutdown connections to be included in the fit-out programme.

Post-Discharge Service

Cylinder Refilling and Return to Service

Following a discharge, we identify the system make, cylinder model and manufacturer-specified wet chemical agent. Our service scope can include cylinder refilling, replacement of applicable single-use components, inspection of discharge pipework and nozzles, and testing of the release and shutdown functions. We coordinate the work with the kitchen operator and document when protection has been restored, so management has a clear basis for reopening the affected cooking line.

Kitchen hood fire suppression system

Description

Great Win Fire & Safety LLC provides kitchen hood fire suppression systems designed for commercial cooking environments. Our solutions include wet chemical suppression systems to help control fires involving cooking oils, grease, and kitchen equipment.

We support system installation, testing, commissioning, maintenance, and rectification to help keep kitchen fire protection systems operational and aligned with applicable requirements.

Book an Appointment

Tell us about your kitchen fire safety requirements. Our team can assist with system installation, maintenance, and project enquiries.
Contact Form
Emergency Call 24/7

+971 54 420 5727

Our Capability

Reliable Kitchen Fire Protection

From system installation to testing and ongoing maintenance, we support dependable fire suppression for commercial kitchens.
Kitchen Hood System Installation
0%
Wet Chemical Suppression
0%
Inspection & Maintenance
0%
- Testing & Commissioning
0%

Why Choose Us

Kitchen Safety Through Reliable Protection

Established in 2018, Great Win Fire & Safety LLC delivers fire protection solutions with a focus on quality, compliance, and dependable service.

Wet Chemical Systems

Solutions designed to address cooking oil and grease fire risks in commercial kitchens.

DCD & ADCD Approvals

Our company holds Dubai Civil Defence and Abu Dhabi Civil Defence approvals for relevant fire protection work.

Maintenance & Support

We provide maintenance and technical support to help keep kitchen fire suppression systems ready for operation.

Need Fire Fighting System Support?

Contact Great Win Fire & Safety LLC to discuss fire protection installation, testing, commissioning, rectification, or annual maintenance requirements.